Batch production cannot wait on a press that needs a specialist’s feel, so this footage is about rhythm: part in, probes measure, ram presses, probes verify, part unloads — then immediately the next one. Loading can be manual on a CNC machine or automatic via gantry; either way the controller runs the measure-press-recheck sequence without interruption, separating any shaft that fails to converge. Each loop on screen lands within 20–90 seconds, part geometry deciding the exact time.
At 20–90 seconds per piece the machine turns out 5–10 times manual volume, and unlike a manual cell the rate stays steady across a full shift and order — stored recipes keep each part number’s parameters one touch away. One operator comfortably runs one or two CNC presses, or several automatic units. The mechanics behind the pace are in our walkthrough of how the straightening machine works.
High-volume producers of motor, gear, and drive shafts place these presses inline after heat treatment or turning, often with gantry loading and per-piece data records. Automation level, force rating up to the 1000-ton class, and conveyor layout are engineered to the plant; supply is 380–480 V three-phase, lead time 60–120 days. Capacity planning is covered in our buyer’s guide to choosing a shaft straightening machine.
Capacity planning reduces to one figure: shafts per shift. State it with the prints, and our throughput desk calculates machine count, loading style, and buffer size to hit it consistently — send us your drawings with the numbers.
Steady 20–90 second cycles, 5–10× manual throughput
One-touch recipe changeover between part numbers
One operator per one or two CNC presses, more per auto line
Inline gantry loading with per-piece records
Force ratings up to the 1000-ton class
SITE：
