Watch a batch of axle shafts move through an automatic press at production pace. Parts queue on an infeed conveyor, roll into the supports, and are measured while the next shaft is already waiting; corrected pieces flow onto an outfeed rack in a steady rhythm. The ram, probe and supports cycle identically on every part, which is where the speed advantage shows.
A typical shaft takes 20–90 seconds start to finish — roughly 5–10 times the throughput of a hand-operated press with a dial indicator, because measuring, correcting and re-checking share one fixturing. Over a shift the difference is several hundred parts, not a few dozen. Buyers choosing where to invest can compare staffing and force trade-offs in our guide to hydraulic, CNC and fully automatic types.
Agricultural and construction machinery builders, tier suppliers and repair shops use this size of press for stepped shafts, half-shafts and hydraulic cylinder rods. Controls, loader style and guarding are quoted against the actual part list rather than a generic package. Automated variants are collected under automatic straightening machines.
Send a sample print and your batch size; we will estimate realistic cycle time and labor savings before you commit. Start from the contact form and include your shift pattern.
20–90 seconds per part, about 5–10× manual throughput
Infeed and outfeed conveyors overlap handling with correction
Automatic accept/reject sorting at cycle end
Recipe storage for different shaft families
Parts from 100 mm to 12 m on one bed
SITE：
